The PDF looks perfect on your screen, but the printout is wrong. The edges of the text are cut off, the page is printed tiny in the middle of the sheet, the picture is dark, the pages come out sideways, or one page prints on two sheets. These problems are frustrating, and almost always they have a simple cause. This guide goes through the most common printing problems and shows how to fix each one.
Problem 1: The text or the edges are cut off
Cause: The page size of the PDF does not match the paper in the printer, and the program prints at “actual size”. A page designed for US Letter paper can lose a little at the top and bottom on A4 paper, and an A4 page can lose a little at the sides on Letter paper.
Fix: In the print window, choose the option called “Fit”, “Fit to page” or “Shrink to printable area”. This scales the page so that all of it fits on the paper. Also check that the paper size in the print window matches the paper in the printer. Our guide A4 vs US Letter explains why the sizes differ.
Problem 2: The page prints very small, with large margins
Cause: The PDF has a small page size, or the program is scaling the page down. This often happens with PDFs made from pictures, where the page is as big as the picture, and with documents with very wide margins.
Fix: Choose “Fit” or “Fill page” in the print window. If the page itself has large empty borders, trim them with Crop PDF, which lets you cut a set number of millimetres from each side. If you make PDFs from pictures, choose A4 or Letter as the page size in JPG to PDF instead of “same size as the picture”.
Problem 3: The pages come out sideways or upside down
Cause: The page is stored in the wrong orientation. This is common with scans and phone photos.
Fix: Turn the pages with Rotate PDF and save the new file, then print that file. The rotation is saved inside the PDF, so it prints correctly on any printer.
Problem 4: A document has pages of different sizes
Cause: You merged files that came from different sources, so some pages are A4, some Letter, and some are the size of a photo. The printer has to decide how to handle each page.
Fix: Make the pages the same size before merging. If the pages come from pictures, convert them with the same page size setting. Before printing, check a few pages in the print preview. In the print window, “Fit” makes all the pages fit the sheet, though pages of very different shapes will still have different margins.
Problem 5: The picture or the scan prints too dark or too light
Cause: The original photo was dark, the scan was taken in poor light, or the printer is set to a draft or a saving mode that uses less ink.
Fix: First check the printer’s quality setting in the print window. If the page itself is dark, the best fix is to take the photo or the scan again in even, bright light. Brightness cannot be rescued reliably after the picture is taken.
Problem 6: The file prints very slowly or not at all
Cause: The PDF is very large, mostly because of high-resolution pictures, and the printer or the computer runs out of memory.
Fix: Reduce the file size with Compress PDF. For printing, choose the Better quality setting so the print is still sharp. Alternatively, print a few pages at a time using the page range option in the print window, or split the document with Split PDF.
Problem 7: Only some pages print
Cause: The print range in the print window is set to the current page or a selection, or the PDF has pages that the printer cannot process because the file is damaged.
Fix: Check that the range is set to “All”. If some pages are blank or missing even in the viewer, the file may be damaged. Try Repair PDF, and check the message about the pages that could not be recovered.
Problem 8: The PDF will not print because it is protected
Cause: The owner of the PDF has set a restriction that blocks printing, or the file needs a password to open.
Fix: If you know the password, you can remove the protection with Unlock PDF. Only do this for files that belong to you or that you have permission to use. If the document belongs to someone else, ask them for an unprotected copy.
Problem 9: Forms print without the typed answers
Cause: Some programs do not print form field content unless the form is set to print fields, or the fields were filled in a different program.
Fix: Fill in the form with Fill PDF Form and turn on the option to flatten the form after filling. Flattening turns the answers into fixed page content, which prints the same way everywhere. You can also flatten an existing filled form with Flatten PDF.
A short printing checklist
- Open the print preview and look at a few pages, not only the first one.
- Match the paper size in the print window to the paper in the printer.
- Choose “Fit” unless you need the exact original size.
- For double-sided printing, check the binding edge setting.
- Print one page as a test before you print a long document.
Frequently asked questions
Why does the PDF look fine on screen but print wrong?
The screen adjusts the page to its own size. The printer has a fixed paper size and printable area, so page size and scaling settings matter much more.
Can I change the page size of a PDF?
Changing the page size properly means rearranging the content, which is best done in the program that created the document. For PDFs made from pictures, create the PDF again with the page size you need.
Which program should I print from?
A current PDF viewer such as the one built into your browser or a dedicated reader works well. If a problem appears in one program, try another one to find out whether the file or the program is at fault.
Need to prepare a file before printing? Explore the PDF tools on our tools page.